Unscrew The top part of the tank and fill down the side avoiding the centre chimney.
To clean the tank part fill the unit with warm water, replace the top and shake vigorously. And then air dry the components, Aspire do not recommend that you clean the atomiser head or wicks so remove those first.
Unscrew The top part of the tank and empty out any juice, Pull the glass from the base part and unscrew the old coil and replace with a fully primed new coil, Replace the glass, fill, then screw the top back on, allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)
All Nautilus Coil heads including the New 0.7 Ohm Coils
Any 510 threaded mod.
Because of the consumable nature of the coils and for hygiene reasons we do not take back tanks or coils unless they are dead on arrival, You must inform us about this within 24 hours of delivery.
Buyers should beware of the many sellers of fakes and clones of devices and tanks made by Aspire, they will not have been through the same strict quality control or design process and may contain sub-standard materials, Aspire’s devices have been targeted hard but you can be assured as an authorised dealer we will only ever offer you genuine products that come directly from Aspire themselves.
No posts found