Important: This device comes with Sub Ohm coils (0.6 Ohms) please ensure that you use a suitable device and suitable high drain batteries that are safe to use at Sub Ohm. Not compatible with any ego "pen type" batteries, If in any doubt please contact us before purchase.
A simple design with a focus on getting the job done, the highly effective and compatible Brit Mini Atomizer by Smok integrates with a wide range of box mods. Designed with a top airflow system, making adjustments and free airflow could not be easier. Restrict your airflow to the level which suits your vaping needs.
- 1 x Brit Mini Tank by Smok
- 1 x BM2 0.6 Ohm Dual Core (15-35w - Best at 25w)
- 1 x BM2 1.2 Ohm Dual Core (15-35w - Best at 25w)
- 1 x Spare Pyrex Glass Tube
- 1 x Bag Spare Parts
- 1 x User Manual
At a glance
- Top Filling
- Bullet Drip Tip
- Stainless Steel
- Pyrex Glass Tank
- Airflow Control
- Height: 44mm, Diameter: 22mm
- 2.0ml Capacity
To clean the tank part fill the unit with warm water, replace the top and shake vigorously. And then air dry the components,
Replacing The Coils
1st prime the coil with juice by dripping it into the coil until all of the cotton is soaked, Then remove the top and glass part, once removed the atomiser head (Coil Unit) is located in the tank base unscrew and replace this part with a fresh head, do not over tighten, replace the tank base taking care to align the vent tube with the atomiser head, do not over tighten, allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)
Any 510 threaded mod capable of firing 0.60 / 1.20 Ohms.
Because of the consumable nature of the coils and for hygiene reasons we do not take back tanks or coils unless they are dead on arrival, You must inform us about this within 24 hours of delivery.