Aspire Premium Kit

ASP-PREMKIT
Write a review
£24.95 (£20.79 Excl. Tax)
£49.96
You save: £25.01
Out of stock
Price in points: 2079 points
Reward points: 125 points
What Our Customers Say
Delivery
Payment Options
RedJuice Advantages

Rapid Order Turnaround

Order Status NotificationsWe will keep you updated at each stage of the delivery process by email.

Knowledgeable Customer Care

Buy With Confidence

Contents

  • 1 x Aspire Carbon Fiber Variable Voltage Battery (1000 mAh)
  • 1 x Aspire Nautilus Mini 2ml BVC (Bottom Vertical Coil) Adjustable Airflow Tank System
  • 6 x BVC Atomiser Heads (Coil Unit) 1.8 Ohm.
  • 1 x USB Charging Lead
  • 1 x User Manual

At a glance

  • Variable Voltage Carbon Fiber Battery 3.3v - 4.8v (1000 mAh Battery)
  • 2ml Pyrex Glass Tank Capacity.
  • Adjustable Airflow collar at the base of the tank (0.9mm - 1.8mm)
  • Replaceable Drip Tip.
  • Bottom Filling
  • Compatible With The Nautilus BVC & BDC Coils (We Stock Both)

How to fill

Holding the tank upside down grip the pyrex glass with one hand (never the top of the tank, it will get tight and jam if this starts to unscrew, the base always has to come off first, if the tank becomes hard to unscrew try tightening the top part back onto the glass, this should allow the base to be removed freely.) grip the bottom ring of the tank with the other hand & unscrew and remove the tank base, fill the tank taking care not to allow any E-Juice to enter the middle post (to avoid gurgling*) Screw the base of the tank back on taking care to align the threads of the vent tube to the atomiser head that is mounted in the base unit, (be careful not to over tighten any parts as it will make it hard to remove the next time you try) allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)

*If you do get some juice down the centre post just finish building the tank, remove the drip tip and give the tank a few strong flicks away from you to vent the juice back out of the air tube through the top then clean away any residue

Cleaning

To clean the tank part fill the unit with warm water, replace the top and shake vigorously. And then air dry the components, Aspire do not recommend that you clean the atomiser head or wicks so remove those first.

Replacing The Coils

Follow the instructions above for filling the tank & removing the base, once removed the atomiser head (Coil Unit) is located in the tank base unscrew and replace this part with a fresh head, do not over tighten, replace the tank base taking care to align the vent tube with the atomiser head, do not over tighten, allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)

Compatible with

Any Ego style battery and 510 threaded mod.

Warranty

Because of the consumable nature of the coils and for hygiene reasons we do not take back tanks or coils unless they are dead on arrival, You must inform us about this within 24 hours of delivery.

A note on clones (The Cheaper Ones)

Buyers should beware of the many sellers of fakes and clones of devices and tanks made by Aspire, they will not have been through the same strict quality control or design process and may contain sub-standard materials, Aspire’s devices have been targeted hard but you can be assured as an authorised dealer we will only ever offer you genuine products that come directly from Aspire themselves.

Brand
Aspire
Device Stats
Size
  • 176mm x 18mm
Device Weight
  • 110g
Materials
  • Pyrex Glass ,
  • Stainless Steel
Protection
  • 10 Second Cutoff
Display
  • LED
Battery Life Display
  • Only tells you when it is low
Ohm Meter Display
  • No
Motion Sensor
  • No
Telescopic
  • No
On / Off Switch
  • Yes
Coil Features
Coil
  • Bottom Vertical Coil ,
  • Bottom Dual Coil
Available In
  • 1.6 Ohm ,
  • 1.8 Ohm
Find similar
Compatible With / See Also
 
  • Customers Also Bought
  • Recently Viewed