Introducing the Athos tank from aspire, the Athos tank is a new heavy hitter for those who prefer both dense clouds and top-notch flavor. It employs a convenient top-fill, bottom adjustable airflow, as well as the innovative penta-coil head and a tri-coil head to provide you with ultimate flavor and tremendous vapor production. Its parts can be fully disassembled to ensure trouble-free daily use, cleaning and maintenance.
- 1 x Aspire Aspire Athos Sub Ohm Tank 2ml
- 1 x Athos A5 (Penta-Coil Atomizer Head) 0.16Ω ( 100W - 120W) (Pre-Installed)
- 1 x Athos A3 (Tri-Coil Atomizer Head) 0.3Ω ( 60W - 80W)
- 1 x Replacement Pyrex Glass
- 1 x Replacement Delrin Drip Tip
- 12 x O-Rings
- 1 x User Manual
At a glance
- Top Filling
- 2.0ml Pyrex Glass Tank Capacity.
- 51mm height
- 25mm Diameter
- Metal Protective Sleeve over Glass Tube
- Replaceable Clear or Derlin Drip Tip
How to fill
Top Filling! Unscrew and remove the top part and fill down the side of the glass avoiding getting any down the center of the coil.
To clean the tank part fill the unit with warm water, replace the top and shake vigorously. And then air dry the components, Aspire do not recommend that you clean the atomiser head or wicks so remove those first.
Replacing The Coils
Empty the tank 1st then unscrew and remove the top part, Pull the glass from the base, once removed the atomiser head (Coil Unit) is located in the tank base unscrew and replace this part with a fresh head, do not over tighten, replace the glass on the base, Prime the coil and then allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)
Any 510 threaded mod capable of sub-ohm firing (see the above warning about sub-ohm usage)
Because of the consumable nature of the coils and for hygiene reasons we do not take back tanks or coils unless they are dead on arrival, You must inform us about this within 24 hours of delivery.