Aspire Cleito 120 Tank 2ml

IMPORTANT: THIS TANK COMES WITH THE 2ML TPD GLASS BUT IS COMPATIBLE WITH ALL STANDARD CLEITO 120 SPARES.

Description

The Aspire Cleito 120 tank improves on its incredibly popular predecessor with a series of new features; making it the brands first “Maxi-Watt” tank.

Contents

• 1 x Aspire Cleito 120 Sub Ohm Tank 2ml
• 1 x Spare Glass Part
• 1 x Aspire Vape Band
• 2 x 0.16 Ohm Coil (100 - 120 Watts)

At a glance

• Top Filling
• 2.0ml Pyrex Glass Tank Capacity.
• 58mm height
• 25mm Diameter
• Stainless steel

How to fill

Top Filling! Unscrew and remove the top part and fill down the side of the glass avoiding getting any down the center of the coil.

Cleaning

To clean the tank part fill the unit with warm water, replace the top and shake vigorously. And then air dry the components, Aspire do not recommend that you clean the atomiser head or wicks so remove those first.

Replacing The Coils

Empty the tank 1st then unscrew and remove the top part, Pull the glass from the base, once removed the atomiser head (Coil Unit) is located in the tank base unscrew and replace this part with a fresh head, do not over tighten, replace the glass on the base, Prime the coil and then allow a minute or two for the juice to soak into the wicks before firing to avoid getting a dry burn (damaging the wicks in the atomiser head)

Compatible with

Any 510 threaded mod capable of sub-ohm firing (see the above warning about sub-ohm usage)

Warranty

Because of the consumable nature of the coils and for hygiene reasons we do not take back tanks or coils unless they are dead on arrival, You must inform us about this within 24 hours of delivery.